Why Train With Power

Beneficial for Everyone

Power meters are not just tools for the elites. Everyone from a Kona-bound triathlete to a Gran Fondo enthusiast to those just riding to their local coffee shop can benefit from using a power meter.

  • Consistency

    Power Numbers are Consistent

    Power is the most accurate way to measure your effort level when cycling. Traditional training methods such as heart rate, speed, and perceived exertion can all change with external variables. Power is not affected by any outside variables, only by the pressure applied to your pedals. 250W into a headwind is the same effort level as riding at 250W with a tail wind.

    Let’s say you are riding to your favorite coffee stop. If you were pacing by speed, you may be pushing too hard into a headwind and may need more than a shot of espresso to make it back home. As you arrive at the cafe, you order your shot of espresso and head back home. As the caffeine enters your bloodstream your heart rate begins to elevate which may cause your heart rate zone that you are trying to target become inaccurate. As you ride back, that tbsp of sugar that you put in your espresso shot begins to kick in. You are feeling good and start upping the pace, only to be barely able to pedal 30 minutes later as you use all of the energy from the sugar and head towards a catastrophic bonk. Using a power meter can help you avoid this situation, allowing you to pace your effort consistently.

  • Accurate Training Zones

    Get Accurate Training Zones

    A powermeter will provide you with accurate training zones, and you can use these training zones to get faster. One of the first things that you will want to do when getting your powermeter is to do a fitness test. You can use popular indoor training applications such as Zwift or TrainerRoad who have these tests already built into their software. You can either use a ramp test or 20 minute effort to get your FTP , the theoretical power that you can hold for 1 hour.

    If you are new to training, a ramp test is the recommended protocol as it is less daunting then an all out 20 minute effort and doesn’t require any pacing. If you are doing your test outside, you will have to perform the 20 minute test. Find a flat or slightly uphill piece of road with no stops and minimal turns. Perform an all out 20 minute effort. Take the average power over the 20 minutes and multiply by 0.95. This will be your FTP and will help create your training zones.

  • Structured Workouts

    Structure Your Workouts More Effectively

    Once you know your FTP , you can use this number to determine your training zones. You can enter your FTP here to get your training zones.

    You can use these zones and numbers for structured interval training assigned through a coach or training app, or just for a pacing guide on your way to the coffee shop. If you had a power meter, you could have seen that you were pushing over your limit on your way to the coffee shop and may have prevented that catastrophic bonk!

  • Tracking Calories Burned

    The Most Accurate Way to Track Calories Burned

    A power meter is able to track the number of Kilojoules produced in a ride. 1 calorie = 4.186 kilojoules. Although at first glance it appears that there is a 4 to 1 ratio comparing kilojoules to calories, the human body produces a lot of heat energy when applying power to the pedal and part of those calories are wasted as heat. Factoring inefficiencies, 1kJ of exercise equals roughly 1 calorie of food burnt.

    Not everyone is the same, but a power meter can show you your calories burned within 5% accuracy while heart rate can only predict your calories within 10% - 20% accuracy. If you are looking to lose weight, maintain weight, or track your calories only a power meter can show you, with the highest accuracy, how much energy you have burned during your workout.

  • Tracking Fitness & Fatigue

    Track Your Fitness

    With training platforms such as Training Peaks, Today’s Plan, TrainerRoad, Zwift, and Strava showing TSS or Suffer scores a power meter is the only accurate way to gather this data. A training stress score for an activity is calculated based off your FTP and the power levels held during your ride. 100 TSS = riding at FTP for one hour.

    TSS is used to calculate your CTL and ATL level. Your CTL is your chronic training load, and is your average TSS over the past 45 days. Your CTL is also known as your fitness. Your ATL is your acute training load and is your average TSS over 7 days. This is also know as your Fatigue level and can be used to judge the training load over 1 week of training. You can subtract your CTL from your ATL to give you your TSB (training stress balance). Your training stress balance represents your freshness or fatigue. If your TSB is negative that means you are fatigued, but building fitness. If your TSB is positive this means that you are fresh.

  • Dual or Single-Sided Power

    Dual Power or Single-Sided Power?

    A dual power meter is the ultimate and most accurate training tool. A dual power meter will measure the power from each individual leg to calculate your total power output. You can also get data like pedal smoothness and torque effectiveness to analyze and optimize your pedal stroke. For those looking for the most accurate and data comprehensive power meter the 4iiii PRECISION 3+ PRO dual-sided power meter is the right choice for you.

  • Single-sided Powermeters

    A single-sided power meter takes the power number from your left or right leg and doubles it to show your power output. Single sided power is still an effective training tool for the vast majority or cyclists. What’s important is that you will be getting consistent and reliable data for your training. Our left only PRECISION 3+ Powermeters still come with our patented 3D strain gauge technology and also include a scale factor meaning that if you know your leg imbalance you can calibrate your power meter through the 4iiii app to accommodate for this. If you do decide to upgrade from a single-sided power meter to a dual power meter be sure to re-test your FTP !

  • Tracking Heart Rate

    Is Heart Rate Still Useful?

    A heart rate monitor is a very useful tool when used with a power meter. A heart rate monitor can let you know how your body is physiologically adapting to your training routine. As you get fitter, your heart rate will be lower at the same power levels meaning that your body is adapting to your training. You can also use your heart rate monitor to track your recovery. If you are out for a hard ride or tackling a tough interval session and are struggling to hit your power numbers you can use your heart rate monitor to see how your body is responding. If your heart rate is not rising as per your other training sessions, you may be risking overtraining and is a sign to take it easy or even a rest day.

  • Wireless Connectivity

    If you are looking to get into Zwift racing, a heart rate monitor is necessary to ensure that you are not disqualified from your race. The Viiiiva Heart Rate Monitor is compatible with both ANT+ and Bluetooth devices meaning that you can connect it to your iOS device, Apple TV, or laptop when Zwifting. The Viiiiva also can act as an ANT+ to Bluetooth bridge, meaning that you can connect your ANT+ devices to the Viiiiva and convert those signals to Bluetooth.

Update for US Customers — Reese’s Law

Choose your region: